Get A Quote
+86 756 3639 029

PBMS9000 Battery Monitoring Solution for Large-scale Data Center

PBMS6000 UPS Battery Monitoring System is designed for large data center projects. PBMS6000 offers you a real-time battery monitoring opportunity to decrease your worries about battery monitoring.

Long Life Designed

Quality Guarantee

24/7 Guarantee

Support Guarantee

OEM Support

OEM is acceptable

▸ Suitable for UPS and data center application
▸ Build-in web server with visual display
▸ Measure lead-acid or multi-pole battery
▸ Ring communication, any communication failure will not affect other sensors’ communication
▸ Monitor battery voltage, current, impedance, insulation ..resistance, ripple current, ripple voltage, SOC, SOH, etc.
▸Auto-sensing for the battery sensor’s ID address
▸ Dual-source to avoid power shutdown
▸ Comply with IEEE 1188-2005

Battery Type
Lead Acid Battery, Multi-pole Battery
Data Center
ARM cortex-A7 528MHz
512MB flash, EMMC 4G + 8G SD memory card
Total Strings
1~6 Strings
Cell Voltage
2V (1.6~2.6V)           6V (4.8~10V)           12V (7.5~15.6V)
Sleeping Mode
Up-link Communications
2 Ethernet ports (10/100M), MODBUS-TCP, SNMP
1 RS485 port, MODBUS-RTU, Baud rate: 9600bps, 19200bps, 38400bps (optional)
1 CAN port, CAN-BUS
Down-link Communications
6 Channels RJ11 Ports, each Port Max. Connect≦70pcs Batteries,
total Max. 420pcs
Communication Protocol
SNMP, Modbus TCP
Standard 19” inch 1 U Device, 430mm×200mm×44mm

Open hole: 465mm×32mm
1200bps ~ 115200bps
Sensor LED Indicates
Green: Normal Status             Red: Abnormal Status
10.1’’ inch touch-screen HMI for local display and operation
Operation Temperature
-15℃ ~ +60℃
Operation Humidity
10% ~ 95% Non-condensing
EMC, ROHS, CE, ISO9001, ISO14001

DFUN PBMS9000 Battery Monitoring Solution

PBMS9000 with UPS Battery Monitoring System

DFUN concern your battery health with creative ways.

- System Structure -

PBMS9000 System Structure includes the PBMS9000, HMI-9000, PBMS-CM/VM, Ambient temperature & Humidity aensor and battery cell sensor. A battery cell sensor is like a stethoscope to examine the condition of the battery. With the PBMS9000 battery monitoring system, customers can be at ease, because it can monitor batteries in real-time and alarm customers anytime and anywhere.

bms monitoring

- Master Hardware Structure -

batery monitoring

– Standard 1 U design for distribution cabinet

– Monitor Max. 6 strings battery, in a total of 420 batteries

– Built-in web server with visual display

– Measure battery string current and voltage, ripple voltage, ripple current, charge and discharge current, internal temperature, impedance, SOC and SOH

– Setpoint alarm for cell voltage, internal temperature, impedance, SOC, SOH (upper limit / lower limit) and string voltage, current, SOC (upper limit / lower limit)

–  Alarm message by SMS or Email

– Support SNMP, Modbus-TCP, Modbus-RTU, CAN-BUS protocols

– Support MQTT, JSON format to upload data

– 2 Ethernet port for data upload

– 1 RS485 port (support 1~6 strings ambient temperature & humidity acquisition), 6 DI ports (digital Input connecting), 6 DO ports (sound and light alarm)

battery management system company

- Cell Sensor Hardware Structure -

- Project Reference -

- Packaging -

DFUN TECH adopts the egg-shaped packaging, which enjoys an obvious feature of resisting shock. That is to say, our battery monitoring devices can be protected well and surely brings customers fully functional products in good shape.

  • Cabinet for Cabinet for Pre – install and Pre – wiring
  • on – time delivery.
  • Available shipping way
  • Unique packaging to anti drop & collision.
  • One – to – One wire packaging
  • Reinforce Packaging

- BMS Case Study Video -

Get A Quote